EPOXY PRODUCTS FOR REBUILDING AND PROTECTION WORLDS MOST UNIQUE AND SUSTAINABLE CONCEPT FOR SURFACE REPAIR, SURFACE REBUILDING AND SURFACE PROTECTION

DESCRIPTION

Wencon Ceramic Coating is a two-component, liquid epoxy coating suitable for a wide range of applications. It provides a smooth non porous surface, which is resistant to bi-metallic corrosion, light chemical aggression, corrosion and erosion as well as impingement.

Typical applications are coating of surfaces rebuild after deterioration and protection against wear, corrosion and bi-metallic corrosions. Wencon Ceramic Coating has a high abrasion resistance, making it suitable for applications on propeller nozzles, rudders, thruster tunnels and housings. In addition, the product also offer high temperature resistance, which makes it ideal for applications on gas scrubbers, condensers and end-covers.

  • Strong adhesion to all metal  and GRE surfaces
  • High wear resistance
  • High temperature resistance
  • Efficient double coat system
  • High coverage rate
View Safety Data Sheet
Instructions for use
Download Product Information (.PDF)

KEY TECHNICAL DATA

Max temperature+220- +320°C (428 – 608° F)
Consistencyfluid
Mixing ratio vol.1:2
Apply withspatula/brush
Potlife at 20°C20-30 min. mixed in small amounts
Curing time10-15 hours
Machineabilityno
Specific volume658 cm3 / kg
Dielectric strength10 KV/mm
PRODUCT NUMBERSPRODUCT NAMEIMPA NO.ISSA NO.
No. 1017Wencon Ceramic Coating, light grey 0,5 kg (1,1 lb) unit812593NA
No. 1018Wencon Ceramic Coating, light green 0,5 kg (1,1 lb) unit812594NA