Under Water Coating, Now on Cartridge
WENCON UW Coating is an abrasion and corrosion resistant two-component epoxy, that will adhere and cure on dry, wet as well as submerged surfaces.
Suitable for touch-up repairs on superstructures and piping in general.
100 % solid and solvent free coating, capable of building up to 500μm thickness in one layer.
WENCON UW Coating can be applied on surfaces where it is impossible obtaining a 100 % clean and dry repair area, such as splash-zones as well as underwater.
Mixing: Component A and Component B are combined in the static mixer nozzle that is screwed on to the cartridge before application can begin.
Discard the first 1 cm, of the product until product is evenly coloured, and begin application.
If the product has cured, replace the nozzle with new static mixer nozzle.
Compatiblility: WENCON UW Coating is in general compatible with other epoxy-polyamide / amine paint & polyurethane coatings. These substrates bond well to each other as long as the surfaces are clean and slightly abraded. If any questions, please contact WENCON for confirmation of compatibility.
- Strong adhesion to all steel & metal alloys, GRE etc.
- High wear resistance
- High temperature resistance
- High coverage rate
UW Coating Cartridge
UW Coating MSDS
Key technical data
|Max temperature||-50- +160°C (-58 – 320° F)|
|Mixing ratio vol.||1:2|
|Potlife at 20°C||25-35 min. mixed in small amounts|
|Curing time||8-18 hours|
|Specific volume||535 cm3 / kg|
|Dielectric strength||10 KV/mm|
|Product number||Product name||IMPA no.||ISSA no.|
|No. 1037||Wencon UW Coating orange, Cartridge||NA||NA|