Wencon UW Cream is a two component cream, to be applied on wet surfaces or under water. The UW Cream is excellent for filling up holes, dents and rebuilding of surfaces which, due to high humidity, has to be done in wet conditions.
Typical applications are corroded hulls and all underwater parts of ships and structures, tanks, pipes, flange faces, etc. It is also excellent for filling up cavitation damages on hulls and rudders.
After curing Wencon UW Cream is resistant to oil, saltwater, water, most diluted acids and a range of solvents.
- Can be applied on wet surfaces or under water
- Cures under water and on wet surfaces
- For filling up cavitation damages
- Long pot-life under water
- Strong adhesion to all metal and GRE surfaces
View Safety Data Sheet
Instructions for use
Download Product Information (.PDF)
KEY TECHNICAL DATA
|Max temperature||+60- +160°C (140 – 320° F)|
|Mixing ratio vol.||1:2|
|Potlife at 20°C||25-35 min. mixed in small amounts|
|Curing time||10-18 hours|
|Specific volume||526 cm3 / kg|
|Dielectric strength||10 KV/mm|
|PRODUCT NUMBER||PRODUCT NAME||IMPA NO.||ISSA NO.|
|No. 1014||Wencon UW Cream, 0,5 kg (1,1lb) unit||812334||75.553.91|